Desander

ZQJ series desander for solids control,hydrocyclone desander separators for drilling fluids.oilfield desander China manufacturer

ZQJ desander Technical Parameters ( Get customized Desander From us)

Model	ZQJ250×2
cyclone diameter	10250mm
cyclone number	2
Capacity	≤240 m3/h
Pressure	0.210.4Mpa
Separation size	≥47μm
matching pump	SB8×6-13(55kW)
Screen area	1800×600mm
Screen meshes	200/20
Screen motor power	0.8kW
Dimension	1465×1160×1950mm
Weight	1200kg

Desander for drilling fluids solids control:

Hydrocyclones is also called cyclone separator.Hydrocyclones consist of (10 in. cone) and (4 in. cone)are drilling rig equipments with a set of hydrocyclones that separates sand and silt from the drilling fluid.

Desander is installed after shakers and degasser but before desilter. Desander removes those abrassive solids from the drilling mud which cannot be removed by shakers.

Desander, as stated earlier, have no moving parts. The larger the internal diameter (ID) of the desander is, the greater the amount of fluid it is able to process and the larger the size of the solids removed.

Desander (10 in.cone) are able to remove roughly 50 percent of those solids within the 40-50 micron range at a flow rate of 500 gallons per min (gal/min), while desilter (4 in. Cone) are able to remove approximately 50 percent of those solids within the 15-20 micron range at a flow rate of 60 gal/min. Micro fine separators are able to remove around 50 percent of those solids within the 10-15 micron range at a flow rate of 15 gal/min.

 Desander is typically positioned next-to-last in the arrangement of , with as the subsequent processing unit. Desander are preceded by gas busters, gumbo removal equipment (if utilized), shale shakers, (if utilized) and .Desander is widely used in oilfield drilling.

China desander manufacturer,solids control system desander,drilling fluids,drilling cuttings desander..Your best !Your best Hydrocyclone Desander for drilling  mud circulation system.

Desander